Last Updated on September 1, 2022 by AR Khan
If your recliner leans to one side, it can be uncomfortable and frustrating to use. There are several reasons why a recliner might lean, and each fix will depend on the cause. In this blog post, we’ll discuss the most common reasons for a recliner to lean, and how to fix them.
Why does a recliner lean to one side and how to fix them?
A recliner leans to one side because of an imbalance in the construction of the chair. This can often be fixed by adjusting the screws on the bottom of the chair.
A recliner that leans to one side may be caused by a number of factors, including:
- An uneven floor
- A loose screw
- An incorrectly positioned hinge
- Recliner’s springs
- Chair’s upholstery
- Broken leg
If your recliner is leaning to one side, it is important to identify and correct the cause as soon as possible to avoid further damage.
An uneven floor
There can be a number of reasons why a recliner might lean to one side, but one potential cause is an uneven floor. If the floor is uneven, it can cause the recliner to tilt in that direction.
This can be a safety hazard, so it’s important to address the issue as soon as possible.
A loose screw
A loose screw can be the cause of a recliner that leans to one side. If the screw is not tight, it can create an imbalance in the recliner and cause it to lean. This can be a safety hazard, as the recliner could potentially tip over. It is important to ensure that all screws are tight in order to prevent this from happening.
If your recliner is leaning to one side, it may be caused by overload. This is when the weight on one side of the chair is greater than the weight on the other side.
This can happen if you always sit in the same spot, or if you put all your weight on one side when you sit down. Overload can also be caused by putting things on your recliners, such as blankets or pillows.
If your recliner is leaning to one side, you may need to adjust the position of the recliner or move things off of it. You can also try sitting in a different spot.
An incorrectly positioned hinge
If your recliner leans to one side, the cause may be an incorrectly positioned hinge. This can be easily fixed by repositioning the hinge to ensure that it is aligned correctly.
The springs in a recliner are what provides the tension that keeps the chair in an upright position. Over time, these springs can loosen, causing the recliner to lean to one side.
This can be a nuisance, and may even cause the recliner to tip over if not corrected. To fix this, simply tighten the springs by hand or with a wrench. Be sure to check both sides of the recliner, as often one side will loosen before the other.
The upholstery on a chair can become misshapen over time, causing the chair to lean to one side. This is often caused by people sitting in a chair for long periods of time or by sitting in the chair with their weight unevenly distributed.
If you have a recliner that leans to one side, you can try to fix the problem by adjusting the upholstery. This can be done by removing the upholstery and giving it a good stretch. You may also need to replace the upholstery if it is severely misshapen.
If you have a recliner that is leaning to one side, it is most likely due to a broken leg. This can be a cause for concern, as it can make the recliner unstable and unsafe to use.
Materials you may need to fix the recliner
If your recliner leans to one side, there are a few possible materials you may need to fix it.
- First, you’ll need something to support the recliner from underneath. This could be a piece of wood or a metal bracket.
- You’ll also need screws or bolts to attach the support to the recliner.
- Finally, you may need some padding to make the recliner more comfortable.
Where you get these materials will depend on the type of recliner you have. If it’s a standard recliner, you should be able to find everything you need at a hardware store.
If it’s a more specialized recliner, you might need to order the parts from the manufacturer. In either case, it’s a good idea to measure the recliner and take note of the model number before shopping.
Fixing a recliner that leans to one side
If your recliner has started to lean to one side, there are a few things you can do to fix it. First, check to see if the recliner is still under warranty. If it is, you may be able to get it repaired or replaced by the manufacturer.
If the recliner is not under warranty, or if you prefer to fix it yourself, there are a few things you can try:
Check if the recliner is level
First, check to see if the recliner is level. If it’s not, you can try adjusting the feet until it is.
If the recliner is still not level, you can try adding a shim to one side. This will help to level it out.
Tightening the screws
If your recliner has loosened screws, there are a few things you can do to fix it. First, try tightening the screws. If that doesn’t work, you may need to add new screws. You can also try support brackets to help keep the recliner in place.
Replacing the recliner’s springs
If your recliner is leaning to one side, it’s likely that the springs are worn out or broken. You can replace the springs yourself, but it’s a bit of a tricky process. First, you’ll need to find the right springs. You can usually get these from the recliner’s manufacturer or from a recliner repair company.
Once you have the springs, you’ll need to remove the old ones and install the new ones. This can be a bit tricky, so it’s best to follow the instructions that come with the springs. With a little bit of effort, you should be able to get your recliner fixed and back to normal!
How can I replace the old springs?
Once you have the new springs, you’ll need to remove the old ones. This is usually done by removing the screws that hold them in place. Then, you’ll need to install the new springs.
This can be done by screwing them into place or by attaching them with clips. Once the new springs are in place, your recliner should be as good as new ones!
Replacing the broken leg
A broken recliner leg can be a major annoyance. Not only does it make the chair uneven and uncomfortable, but it can also be a safety hazard.
To fix this, you will need to replace the broken leg with a new one. You can get new legs for a recliner at most furniture stores or online. Just be sure to measure the leg so you get the correct size.
To replace the old leg, follow these steps:
- Remove the old leg by unscrewing it from the recliner.
- Attach the new leg to the recliner by screwing it in place.
- Test the recliner to make sure it is level and does not lean to one side.
- Repeat steps 1-3 for each broken leg.
Replacing the upholstery
Over time, furniture upholstery can start to sag, causing the furniture to lean to one side. This is especially common in recliners, which often see a lot of use. If your recliner has started to lean to one side, there are a few things you can do to fix it.
First, try to adjust the upholstery. If the upholstery is loose, you may be able to tighten it up and fix the problem. If the upholstery is severely saggy, however, you may need to replace it.
There are a few ways to replace the upholstery. You can buy new upholstery and replace it yourself, or you can take the piece of furniture to a professional upholsterer and have them replace the upholstery for you.
Replacing upholstery is not a difficult task, but it is important to make sure that you get the right kind of upholstery for your furniture. If you are not sure, it is best to consult a professional. They will be able to help you find the right upholstery and install it properly.
If your recliner’s mechanism doesn’t work properly, this video will show you how you can repair the recliner’s mechanism:
Do I need a Professional’s Help?
A recliner that leans to one side can be a nuisance, and it can also be dangerous if you’re not careful. If you’re having trouble fixing it yourself, it might be time to call in a professional. Here are a few things to keep in mind when deciding whether or not to call for help.
- The first thing to consider is the severity of the lean. If it’s only a minor lean, you might be able to fix it yourself with some adjustments. However, if the lean is significant, it’s probably best to call in a professional.
- Another thing to consider is the cause of the lean. If you can’t identify the cause, or if it seems like it would be difficult to fix, it’s probably best to call in a professional.
- Finally, you should consider the cost of fixing the recliner yourself versus calling in a professional. If the cost is relatively low, and you’re confident in your ability to fix the problem, it might be worth doing it yourself. However, if the cost is significant, or if you’re not confident in your ability to fix the problem, it’s probably best to call in a professional.
In conclusion, there are a few things to consider when deciding whether or not to call for professional help to fix a recliner that leans to one side. The severity of the lean, the cause of the lean, and the cost of fixing the problem are all important factors to keep in mind.
How Does A Power Recliner Work?
We have written a complete guide on How does a power recliner work. If you have queries, you can read our article to know how the power recliners work and what are their build quality and capacity.
How to avoid such problems in the future?
There are a few things you can do to avoid the issue of your recliner leaning to one side in the future.
- First, make sure that the recliner is on a level surface. This will help to distribute the weight evenly and prevent the recliner from tilting to one side.
- Second, don’t sit in the recliner for extended periods of time. This will put extra pressure on one side of the recliner and can cause it to lean.
- Finally, if you notice that your recliner is starting to lean to one side, make an adjustment to even it out.
- Bonus tip: You should always try to purchase a high-quality recliner from a trusted company.
- Bonus tip: You should check your recliner’s condition regularly.
By following these simple tips, you can avoid the issue of your recliner leaning to one side in the future.
I have told you all the possible causes and the fixes for a recliner that leans to one side. In short-
First, try adjusting the legs. If that doesn’t work, you can try adding weight to the opposite side of the recliner. Finally, if all else fails, you can contact a professional upholsterer to take a look at your recliner and see if they can fix the issue.
To avoid having your recliner lean to one side in the future, be sure to use it evenly. Don’t allow one side to bear more weight than the other, and try to keep it away from walls or other furniture. With a little care, your recliner should stay in good shape for years to come.