How To Adjust Steelcase Chair: Gesture, Leap V1 & V2

Last Updated on September 4, 2022 by AR Khan

If you are a Steelcase chair user, you may find that the chair needs some adjustments from time to time. In this blog post, we will show you how to adjust the Steelcase Gesture, Leap V1, and Leap V2 chairs.

How To Adjust Steelcase Chair?

When it comes to adjusting your Steelcase chair, there are a few things you need to keep in mind. First, you’ll want to make sure that you’re sitting in the chair correctly. 

how to adjust Steelcase chair
  • Once you’re sitting in the chair correctly, you can start adjusting the height of the seat. To do this, simply pull up or push down on the lever located under the seat. 
  • You can also adjust the tilt of the seat by turning the knob located at the front of the chair.
  • Finally, you can adjust the backrest of the chair by pulling or pushing on the lever located at the back of the chair. You can also adjust the angle of the backrest by turning the knob located at the top of the chair back.

Steelcase is a leading manufacturer of office furniture, specializing in chairs. While their chairs are designed to be comfortable and stylish, they may not always fit everyone perfectly. This is why it’s important to adjust your Steelcase chair to suit your own body type and needs.

Steelcase gesture, leap v1 and leap v2 are the three popular office chairs. In this blog post, I’ll show you how you can adjust those Steelcase chairs easily.

Steelcase gesture chair adjustment

Also Read: How to take apart steelcase cubicle walls?

Steelcase’s Gesture chair is one of the most adjustable office chairs on the market. With its various levers and dials, you can customize the chair to fit your body and your workspace. Here are some of the ways you can adjust the Gesture:

  • Seat height adjustment: First, loosen the knob on the side of the chair. Then, raise or lower the seat to your desired height. Finally, tighten the knob back up. That’s all there is to it!
Steelcase gesture office chair
Credit: https://store.sigworkplace.ie
  • Backrest height adjustment: Locate the backrest height adjustment knob, which is usually located on the back of the chair near the top. Once you’ve found the knob, turn it to the left or right to increase or decrease the backrest height. You may need to use a bit of force to get the knob to turn, so be careful not to break it.
  • Seat depth adjustment: Follow these steps and you’ll be able to adjust the seat depth of your gesture chair with ease:
gesture chair seat depth
Seat depth adjustment
  1. First, identify the lever that controls the seat depth. This is usually located on the side of the chair.
  2. Next, adjust the seat depth to your desired setting. You may need to experiment a bit to find the perfect setting for you.
  3. Once you’ve found the perfect setting, make sure to lock the lever in place so that the seat depth doesn’t accidentally get changed.
Steelcase gesture chair armrests
  • Armrests adjustment: To adjust the armrests on your gesture chair, simply loosen the screws that hold them in place. Then, move the armrests up or down to the desired position. Once you’ve found the perfect spot, tighten the screws back up and enjoy your comfortable and stylish new office chair!
  • Headrest adjustment: If you want to adjust the headrest on your gesture chair, simply grab the top of the headrest and pull it up or down to the desired height. You can also tilt the headrest forward or backward to find your perfect angle.

With all these options, the Gesture chair can be customized to fit almost any body type and workspace. If you’re looking for an adjustable office chair, the Gesture is a great option.

Steelcase leap v1 chair adjustment

Steelcase leap chair
Credit: sigworkplace.ie

Steelcase Leap V1 is a great chair that adjusts to your needs. This chair has a number of adjustment options that allow you to get comfortable, including height adjustment, seat depth adjustment, and armrest height adjustment. You can also adjust the lumbar support to fit your back, and the headrest is also adjustable. This chair also has a tilt mechanism that allows you to lean back and relax.

Height adjustment

If you have a Steelcase Leap v1 model and want to adjust the height, here’s what you need to do. First, find the adjustment knob on the back of the chair. Second, use a hex key to loosen the set screw that secures the height adjustment tube in place. Finally, adjust the height to your desired level and retighten the set screw.

Steelcase leap v1 adjustment

Leap v1 seat depth adjustment

Leap v1 chairs are a great option for people who want to be able to adjust their seat depth. This can be a helpful feature for people who have back pain or other issues that might make it difficult to sit in a traditional chair.

Here are some simple instructions to adjust the seat depth of your Steelcase leap v1 chair:

  1. Loosen the seat depth adjustment knob located under the seat.
  2. Slide the seat forward or backward to the desired depth.
  3. Tighten the knob to lock the seat in place.

That’s all there is to it! By following these simple steps, you can easily adjust the seat depth on your Steelcase Leap v1 model.

Steelcase Leap V1

Armrest height

It is a common problem for users of the Steelcase Leap v1 office chair to find that the armrests are either too high or too low. Fortunately, there is a simple fix for this issue.

To adjust the height of the armrests, simply loosen the two screws that hold the armrests in place. Then, raise or lower the armrests to the desired height. Finally, retighten the screws.

With this easy fix, you can ensure that your Leap v1 is always comfortable to use.

Lumbar support

To adjust the lumbar support of your Steelcase leap v1 chair, follow this guide:

First, remove the back panel by loosening the two screws that hold it in place. Next, locate the lumbar support bar and loosen the two screws that hold it in place. From there, you can adjust the lumbar support to your desired level of comfort. Once you’re happy with the position, simply retighten the screws and replace the back panel.

By following these simple instructions you can easily adjust your Steelcase leap v1 office chair.

How to adjust Steelcase leap v2 chair?

There are a variety of adjustment options available on the Steelcase leap v2 chair. These options allow you to customize the chair to your specific needs and comfort level. Some of the adjustment options include:

  • Seat height
  • Seat depth
  • Backrest height
  • Armrest height
  • Tilt tension
  • Lumbar support
  • Headrest

Each of these options can be adjusted to ensure that you are comfortable while sitting in the chair. Additionally, the Steelcase leap v2 chair also comes with lumbar support that can be adjusted to provide additional support for your back.

Steelcase leap v2 seat height adjustment

Steelcase leap v2 seat height adjustment
Credit: https://www.btod.com/

Many people don’t know how to adjust the seat height of their Steelcase Leap v2 chair. This is actually a pretty easy task, and there are a few different ways to do it.

One way is to use the gas lift. Simply pull up on the gas lift lever and the seat will rise or lower to the desired height.

Another way is to adjust the seat pan. There are two handles on the underside of the seat, one at the front and one at the back. Simply loosen or tighten these handles to raise or lower the seat.

The last way to adjust the seat height is by adjusting the lumbar support. There are two levers on the back of the chair, one on each side. Simply pull up or push down on these levers to raise or lower the lumbar support. This will also raise or lower the seat height.

Whichever method you choose, adjusting the seat height of your Steelcase Leap v2 chair is easy and straightforward.

Leap v2 seat depth adjustment

Steelcase leap v2 seat depth adjustment
Credit: btod.com

Assuming you have a Steelcase Leap v2 chair, the seat depth can be adjusted by loosening the screws on the underside of the seat, then sliding the seat forward or back to the desired position. Re-tighten the screws to secure the seat in place.

Backrest height adjustment

If you find that the backrest on your Steelcase Leap v2 chair is too high or low, you can easily adjust it to suit your needs. To do this, simply loosen the knob on the back of the chair and move the backrest up or down to the desired height. Once you have it in the right position, tighten the knob again and you’re all set!

Armrest height adjustment

If you find that the armrests on your Steelcase Leap v2 chair are too high or too low, you can easily adjust them to better suit your needs. To do so, simply follow these steps:

  1. Locate the knob on the underside of the armrest.
  2. Use a Phillips head screwdriver to loosen the knob.
  3. Adjust the armrest to the desired height.
  4. Tighten the knob to secure the armrest in place.

By following these simple steps, you can easily adjust the armrests on your Steelcase Leap v2 chair to better suit your needs.

Tilt tension adjustment

If you own a Steelcase Leap v2 chair, you may have noticed that the tilt tension can be a bit too loose or too tight. Here’s a quick and easy way to adjust the tilt tension to your preference.

Leap v2 Tilt tension adjustment
Credit: btod.com
  1. Sit in the chair and lean back slightly.
  2. Locate the knob on the right side of the chair, near the base.
  3. Turn the knob clockwise to tighten the tilt tension, or counterclockwise to loosen it.
  4. Test the new setting by sitting in the chair and reclining back. If it’s still not to your liking, adjust as needed.

That’s all there is to it! By following these simple steps, you can easily adjust the tilt tension on your Steelcase Leap v2 chair.

Lumbar support adjustment

To adjust the lumbar support on the Steelcase Leap v2 chair, simply loosen the knob at the back of the chair and move the support up or down to the desired position. Once you have found the perfect position, tighten the knob to secure the support in place.

Steelcase leap v2 chair’s headrest adjustment

If you find that the headrest on your Steelcase Leap v2 chair is not positioned correctly for your comfort, you can easily adjust it. To do so, simply follow these steps:

  1. Loosen the knob on the back of the headrest.
  2. Adjust the headrest up or down to the desired position.
  3. Tighten the knob to lock the headrest in place.

Now you can enjoy your chair with the headrest positioned exactly how you need it.

Steelcase leap v2 armrest
Credit: btod.com

Final thoughts

I have shown you a step-by-step guide on how to adjust the Steelcase chair for the gesture, leap v1, and leap v2 models. Just follow my instructions to adjust your Steelcase chair according to your chair model. If you have any queries, let me know in the comment section.

Must Read: Steelcase Leap V1 VS V2: Which Is Best For You?
5/5 - (1 vote)

LEAVE A REPLY

Please enter your comment!
Please enter your name here